PressMarts.com Marketplace & Search engine

Komori Spica

Wed, 29 Apr 2009 06:09 -0950

FEATURES SPICA 26/29

Reduced operator workload due to extensive automation
Cuts waste of time and increases production efficiency
Space-saving compact design
Multifunctional press in compact design with outstanding cost-performance
Full CIP4 data compatibility allows implementation of advanced
digital workflow

Broad coverage expands business opportunities
Complete maintenance backup
Total support system ensures easy, consistent operation

Model
Number of colors
Max. sheet size
(mm)
Max. printing area
(mm)

Sheet thickness range
(mm)
Plate size
(mm)

SPICA 26
4,5
480×660
470×650
0.035-0.45

560×670

SPICA 29
4,5
530×750
520×740

0.035-0.45
605×760

Note:
Maximum printing speed may vary according to printing conditions.
Performance and numbers may differ from specifications herein.
Specifications may also be modified for product improvements.

Shinohara SNET System

Sun, 05 Apr 2009 23:17 -0950

The S-NET system makes on-demand printing possible by providing an integrated way to manage every stage of the printing process, from prepress and make-ready to actual printing. With the S-NET system, it is also possible to assure consistency and quality, by using standardized data and comparing panted sheets to target data throughout a run. S-NET's digital technology results in streamlined operations, higher quality, and increased profits．

Shinohara was one of the first members of CIP-3 (the "International Cooperation for Integration of Pre-press, Press and Post-press"), a group formed to create a standard digital format for communicating data related to prepress, press and postpress printing operations. One product of this commitment，the Shinohara CIP-3 Station，provides the most convenient means of rapidly setting ink-key apertures in print runs based on PPF(Print Production Format) fi1es. Acting as a "translator" between a workstation and the printing press，the CIP-3 Station converts the PPF data into the proper digital format and passes it on to the Shinohara printing press. In response，the press automatically calibrates ink-key apertures.

In addition to simplifying initial setup，this method makes it possible to save data from the CIP-3 Station to an operation console. As a result，setting ink-key apertures in repeat jobs is a snap. In ways like this，Shinohara and the CIP-3 will continue to transform the world of printed media.

System requirements

-Windows NT 4.0 service pack3 ( or Windows2000)
- Pentium II 266MHz or greater
- 128MB of available RAM
- 65MB of available hard-disk space
- Video Card or Interface (4MB or greater)
- Serial com port
- CD-ROM drive
- Ethernet Card or Interface
- Color Monitor

Specifications and features of the products are subject to change without prior notice.
Specifications may differ depending on printing quality and operatiing environment.

Shinohara Pre-Inking System (SPIS) functions to get ideal amount of ink film on all inking rollers before actual printing. With the SRIM or theShinohara CIP3 station the SPIS can dramatically reduce the press make ready time and operator's task. Only thing operator has to do is to press the start button, then the ideal ink film is automatically established on all ink rollers by the SPIS and also ideal ink key apertures are automatically setup by the SRIM or the Shinohara CIP3 station.
SPIS ina registered tradmark of Shinohara

SPIS operation flowchart

Note:The system may require tuning to compensate for variations in paper selection and printing environment conditions such as humidity.

Specifications and features of the products are subject to change without prior notice.
Specifications may differ depending on printing quality and operatiing environment.

The Shinohara Color Control Station (SCCS) is at the heart of a closed-loop system that helps to ensure consistent color densities over the course of a print run. To prevent unnecessary color shifting, a color control bar on the target proof is scanned before） the start of print job，and used as a Standard against which to compare color density throughout the run．Comparisons are made at the SCCS using a sensitive peripheral device known as an Auto Tracking Spectrophotometer（ATS）（Not included in SCCS）．Compensation data Calculated based on the differences in color density is processed at the PC and passed to the operation console. Compatible Shinohara printing presses respond to this compensation data automatically，adjusting ink-key apertures to maintain proper color densities．

Auto Tracking Spectrophotometer（ATS）
ATSimgThe SCCS makes use of an ATS unit manufactured by X-Rite Corporation. This device is capable of measuring a color bar in seconds，and showing an operator which areas on the printed sheet are experiencing color shift. Even the specific keys in need of adjustment are identified. The ATS unit can also be configured to account for variation in paper color over the course of a print run．

System requirements

-Scanning system (selectable)
- X-Rite,ATS system
- X-Rite,ATD system

REMARK : X-Rite ATS (ATD) system in not included in SCCS
- Windows NT 4.0 service pack3
- Pentium II 266MHz or greater
- 128MB of available RAM
- 560KB of available hard-disk space
- Serial com port
- CD-ROM drive
- Ethernet Card or Interface
- Color Monitor

www.Shinohara.com

Komori Sprint

Sun, 29 Mar 2009 16:04 -0950

26"/28"Two-Color Offset Printing Press
26"/28"Two-Color Convertible Perfecting Offset Printing Press

SPRINT S228

FEATURES

Reliability enhanced by use of industrial diamonds on the gripper pads of impression and transfer cylinders, as well as increased motor and pump capacity.
Touch-panel for easy, convenient operation from one location is standard equipment. Also, the single paper thickness dial facilitates quick setting.
Excellent performance with either presensitized or polyester-based plates. The Komori Plate Changer is standard equipment, making press setup short and simple.

Model
Number of colors
Max. sheet size
(mm)
Max. printing area
(mm)
Plate size
(mm)
Feeder pile height
(mm)
Delivery pile height
(mm)

SPRINT
(S226)
2
480×660
470×650
560×670
800
425

SPRINT
(S226P)
2
[1×1]
480×660
Single-sided:
470×650
Double-sided:
460×640
560×670
800
425

SPRINT
(S228)
2
520×720
510×710
600×730
800
425

SPRINT
(S228P)
2
[1×1]
520×720
Single-sided:
510×710
Double-sided:
500×700
600×730
800
425

Note:
Maximum printing speed may vary according to printing conditions.
Performance and numbers may differ from specifications herein. Specifications may also be modified for product improvements.
Margin for vacuum wheels on back side of sheet required for double-sided printing.

Komori Sprint GS

Sun, 29 Mar 2009 14:59 -0950

26"/28"Two-Color Offset Printing Press
26"/28"Two-Color Convertible Perfecting Offset Printing Press

SPRINT GS228P

FEATURES

Incorporates Komori's Pre-inking and De-inking system along with a full complement of other automation features. Floppy disk drive and magnetic card reader available as options to transfer the image area ratio scanned from the plate.
Reliability enhanced by use of industrial diamonds on the gripper pads of impression and transfer cylinders, as well as increased motor and pump capacity.
Operation stand allowing centralized operation from one location is standard equipment. The convenient touch-panel facilitates operation and checking of various settings. Also, the single paper thickness dial on the operation side facilitates quick thickness setting.
Excellent performance with either presensitized or polyester-based plates. The Komori Plate Changer is standard equipment for quick and easy press setup.
Available in a straight-printing 2-color configuration and a perfecting model with a sheet-reversing mechanism.
The 26-inch Sprint GS provides a maximum sheet size of 508 x 660mm (20×26 in.).
The GS226P handles a sheet size of 480×660mm (18 7/8×26 in.) in double-sided mode.

Model
Number of colors
Max. sheet size
(mm)
Max. printing area
(mm)
Plate size
(mm)
Feeder pile height
(mm)
Delivery pile height
(mm)

SPRINT GS
(GS226)
2
480×660
470×650
560×670
800
620

SPRINT GS
(GS226P)
2
[1×1]
480×660
Single-sided:
470×650
Double-sided:
460×640
560×670
800
620

SPRINT GS
(GS228)
2
520×720
510×710
600×730
800
620

SPRINT GS
(GS228P)
2
[1×1]
520×720
Single-sided:
510×710
Double-sided:
500×700
600×730
800
620

Note:
Maximum printing speed may vary according to printing conditions.

Performance and numbers may differ from specifications herein.
Specifications may also be modified for product improvements.
Margin for vacuum wheels on back side of sheet required for double-sided printing.